Updating the Firmware Unified Binary Image
This section describes how to update the UBI for the P420m or P320h drive. The UBI
should be updated after installing the support pack software.
The UBI contains the latest firmware and option ROM for the drive. The installation in-
structions are the same for Windows, Linux, and VMware systems and require RSSDM
to be installed.
1. Run RSSDM.
2. Select the P420m or P320h drive.
3. Open the Device menu and select Update Firmware UBI.
4. Locate the UBI file in the support pack directory.
5. Click Update UBI.
6. Click OK to confirm the update.
7. Click OK when complete.
8. Exit RSSDM.
9. Power cycle the system.
P420m/P320h HHHL PCIe SSD Installation Guide
Installing the Support Pack Software
PDF: 09005aef8497e00a
P420m_P320h_HHHL_installation_guide.pdf - Rev. V 12/14 EN
20
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2012 Micron Technology, Inc. All rights reserved.
To Next Page
Loading...
