EasyManua.ls Logo

Micron P420m - Using as a Boot Drive; Windows Server 2012;2012 R2 and Windows 8;8.1 Boot Setup

Micron P420m
55 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Using the P420m or P320h as a Boot Drive
This section describes how to install a supported operating system (OS) on a P420m or
P320h drive with the bootable option feature:
Windows Server 2012 (x64)
Windows Server 2012 R2 (x64)
Windows 8, 8.1 (x64 and x86)
Windows Server 2008 R2 (x64)
Windows 7 (x64 and x86)
SUSE 11.x (x64)
RHEL 7.x (x64)
RHEL 6.x (x64)
RHEL 5.x (x64)
Ubuntu 12.04 LTS
Citrix XenServer 6.1
These instructions can be performed only on P420m and P320h drives with the boota-
ble option feature. The bootable option is determined by part number (see the Part
Numbering Information section on the product data sheet for details).
Before you begin, make sure:
The BIOS setting on your system sees the SSD as being bootable and it has been con-
figured to point to the Micron PCIe SSD as the primary boot device.
The drive is installed in the system as described in "Installing the Drive" and "Instal-
ling the Support Pack Software."
Windows Server 2012/2012 R2 and Windows 8/8.1
Before you begin, it is recommended to remove all storage devices from the system ex-
cept for the P420m/P320h drive or the original OS boot drive.
1. Download and unzip the support pack software.
2. Go to Windows Driver/os_install_drivers and navigate to the subdirectory for
your operating system:
Windows Server 2012 x64: /x64/win8-server2012
Windows Server 2012 R2 x64: /x64/win81-server2012r2
Windows 8.1 x64: /64/win81-server2012r2
Windows 8.1 x86: /x86/win81
Windows 8 x64: /64/win8-server2012
Windows 8 x86: /x86/win8
3. Copy the contents of the subdirectory for your operating system to external re-
movable media, such as a USB drive. (For example, for Windows Server 2012 x64,
copy the contents of the /x64/win8-server2012 subdirectory.
4. Insert the Windows operating system CD/DVD and the USB drive containing the
support pack files into the system and reboot.
5. When prompted, select the option to boot from a CD/DVD.
6. Enter the Windows product key that came with the CD/DVD, if prompted.
7. Select Core (command line) or GUI to begin the installation. (GUI is recommen-
ded for most users.)
P420m/P320h HHHL PCIe SSD Installation Guide
Using the P420m or P320h as a Boot Drive
PDF: 09005aef8497e00a
P420m_P320h_HHHL_installation_guide.pdf - Rev. V 12/14 EN
22
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2012 Micron Technology, Inc. All rights reserved.

Related product manuals