Microplex SOLID F40 - Page 130

130 Troubleshooting
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID F40 Edition 1.1
[PAPER JAM! ]
[E0013 ]
[PAPER JAM! ]
[E0016 ]
[TONER WASTE! ]
[E0028 ]
[TONER WASTE! ]
[E0029 ]
[TONER EMPTY! ]
[E002A ]
[PAPER TRAY FULL!]
[E0057 ]
[STACK ERROR! ]
[E005X ]
There is still paper within the exit unit.
Remove the paper (see section 8.3).
Paper jam within the feeding unit.
Remove the jammed paper (see section 8.3) and
press the key PARK FANFOLD.
The waste toner bottle is full.
Replace the bottle with a new one (see section 3.3).
There is no waste toner bottle within the unit.
Insert a waste toner bottle (see section 3.3).
There is no more toner within the cartridge.
Insert a new toner cartridge (see section 3.2).
The power stacker is full.
Please remove the paper.
X = 4,5,7,8,9,A,B,C
An error occurred at the power stacker.
The number “X” indicates, what kind of error occurred
(see section 8.2.1 and section 8.3.3, too).