Microplex SOLID F40 - Page 33

Operation and Menu Structure 33
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID F40 Edition 1.1
4.4. Function of the Control Panel Elements
Display
The display (panel; 2 x 16 character LCD) serves to show the
printer’s messages.
LEDs
Meaning of the LED Announcements:
The printer control panel contains the following LEDs
(Light Emitting Diodes):
READY
DAT
A
ERROR
The printer is ready to operate, initializing has been completed,
the photoreceptor drum is warmed up etc.
The phase of initializing is not yet completed.
The printer receives printable data.
There are no printable data in the input buffer.
An error occurred in the printer. The printer is OFF LINE.
No error occurring.