Microplex SOLID F40 - Page 52

52 Panel Functions
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID F40 Edition 1.1
5.8. Generating Test Prints (Sliding Pattern)
This function generates a series of test prints without sending
data to the printer.
These test prints facilitate error analysis.
ON LINE
TEST
ON LINE
Panel display
[SOLID F40 ]
[Menu Level 1 ]
[Menu Level 1
]
Notes
Turn the printer OFF LINE with this
key.
A status sheet is generated
(possibly printed on several pages)
The printer is turned ON LINE
again.
Another way to activate the function:
see the following page !