Microplex SOLID F40 - Page 53

Panel Functions 53
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID F40 Edition 1.1
ON LINE
SAVE
SAVE
ON LINE
Panel display
[SOLID F40 ]
[Menu Level 1 ]
[Status Sheet ]
) ) )
[Sliding Pattern ]
[Sliding Pattern ]
Notes
Turn the printer OFF LINE with this
key.
Menu level 1 is selected.
Press one of the ARROW keys until
[Sliding Pattern ] is displayed.
A series of test prints is generated.
The printer is turned ON LINE
again.
!
The printing out of test prints can be stopped by pushing the
ON LINE key.