Quick Start Guide
Commissioning the
28-Port 10G Multi Fiber L2/L3 Switch 19"
12 MICROSENS GmbH & Co. KG, Kueferstr. 16, 59067 Hamm, Germany
4. To find your switch quickly, enter the item number of your switch into the search box on the website.
10.3 Firmware Image File
Please navigate to your switch and select the tab “System Management”. This tab contains recent download files
for your device.
Upload the firmware image file to the device by using the Web Manager. For further information please refer to
the web manual of your device.
10.4 MICROSENS Support
For further questions please contact our support:
E-mail: support@microsens.com
Phone: +49 (0)2381 9452-345 (Mo. – Fr., 7:30 AM – 04:00 PM CET)
11 DECLARATION OF CONFORMITY
The following information is for CE compliance of Class A and Class B devices:
This equipment has been tested and found to comply with the limits for a Class A digital device.
These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio-frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful interference. If the equipment causes
interference to radio or television reception, which can be determined by turning the equipment off and on, users
are encouraged to try to correct the interference by using one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
To Next Page
Loading...
Need help?
General
