Microsoft Remote Control and Receiver Getting Started Guide

1
Welcome
Congratulations on your purchase of the Remote Control and Receiver for Media
Center PC with Windows
®
. The remote control and infrared (IR) receiver (also known
as a remote sensor) let you access and manage your Media Center PC and other
peripheral devices.
Insert the Batteries
The remote control uses two AA (LR6) batteries,
which are included in the package. Whenever you
insert batteries, always make sure both of them
are new.
To insert the batteries
1 Remove the battery compartment cover by
pressing on its release and lifting up.
2 Insert the batteries, making sure to properly orient the positive (+) and negative (-)
ends as specied by the battery compartment labels.
3 Replace the battery compartment cover.
Position the Receiver
For optimum performance, make sure that the distance between the remote and the
receiver doesn’t exceed 20 feet. Keep a direct, unobstructed line of sight between the
receiver and the remote control, and don’t let any natural or articial light shine directly
on the receiver’s IR sensor.
M
Getting Started
Remote Control and Receiver
for Media Center PC with Windows
®
For distribution only with a new computer
0804 Part No. X10-72473-02
2
X107247302mnl.indd 8/9/2004, 11:30 AM1

Microsoft Remote Control and Receiver Specifications

General

Brand	Microsoft
Model	Remote Control and Receiver
Category	Remote Control
Language	English