12 M1196211
5. Angle hinges Down – Using your thumb or index nger, push both hinges down from 90° to approximately
30°. This will require a great deal of force. If necessary, place the microber cloth between your nger and
the hinge for comfort. Be careful not to push the hinge all the way into the bucket as it will be difcult to pull
back out.
6. Remove Kickstand – Using the palm of your hand, rmly hold the device down from the center of the IBC.
Simultaneously, grip the kickstand off-center between your thumb and index nger and rmly pull. Pull with
a moderate amount of force until the foam inserts slide out of the device. If the kickstand is stuck, ensure it is
not caught on the hinges.
H
O
L
D
PULL
To Next Page
Loading...
