EasyManuals Logo

Microsoft Surface Go 3 Replacement Guide

Microsoft Surface Go 3
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
9 M1196211
Service Diagnostics/Troubleshooting Overview
For general Surface support, visit www.support.microsoft.com
To troubleshoot device feature/function problems or learn more about Surface Go visit
www.aka.ms/SurfaceGoHelp
If you’d like to learn more about Windows, visit www.aka.ms/WindowsHelp
To learn more about the accessibility features of the Surface Go, visit the online user guide at
www.aka.ms/Windows-Accessibility
Software Tools:
How To: Update Surface device rmware and OS
How To: Surface Tools Video
Download: Surface drivers and rmware
Download: Surface Diagnostic Toolkit (SDT)
Download: Surface Data Eraser
Download: Surface Imaging Tools
Troubleshooting Approach
The following approach should be considered when troubleshooting Surface devices:
1. Update device to latest OS/FW versions using the SDT tool.
IMPORTANT: Device updates are required as a prerequisite to all hardware replacement.
2. Verify any suspected hardware failures by setting the device in a known OS/FW version state and running SDT
to verify fault:
a. Run SDT and verify if condition persists – Refer to Software Tools section for details on SDT
i. If problem is not resolved, then re-image SSD.
ii. If re-image fails replace device per established procedures.
Component Removal and Replacement Procedures
Prior to Device Disassembly:
Before attempting any removal or replacement, always ensure device is powered off and disconnected from a
power supply.
Always ensure that the work surface is covered with an ESD-safe, soft, non-marring material.
Work surfaces should be cleaned regularly to ensure debris/abrasive particles are not present.
Check to make sure that general guidelines and ESD compliance steps are followed prior to opening device.

Other manuals for Microsoft Surface Go 3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Microsoft Surface Go 3 and is the answer not in the manual?

Microsoft Surface Go 3 Specifications

General IconGeneral
Display Size10.5 inches
Resolution1920 x 1280
Aspect Ratio3:2
Touch10-point multi-touch
ProcessorIntel Pentium Gold 6500Y or Intel Core i3-10100Y
RAM4GB or 8GB LPDDR3
Storage64GB eMMC or 128GB SSD
Operating SystemWindows 11 Home in S mode
Battery LifeUp to 11 hours
Weight1.2 lbs (544 g)
GraphicsIntel UHD Graphics 615
MicrophonesDual far-field Studio Mics
Speakers2W stereo speakers with Dolby Audio
BluetoothBluetooth 5.0
Ports1 x USB-C, 3.5 mm headphone jack, 1 x Surface Connect port, Surface Type Cover port, MicroSDXC card reader
Front Camera5.0 MP with 1080p HD video
Rear Camera8.0 MP with 1080p HD video
Dimensions245 x 175 x 8.3 mm
Wi-FiWi-Fi 6 (802.11ax)
SecurityWindows Hello face authentication

Related product manuals