Microsoft Surface Go 3 Replacement Guide

4 M1196211
Device Identity Information
Surface Go 2 & 3 Models
1901 – Surface Go 2 Consumer Wi-Fi (Platinum and Black)
1926 – Surface Go 2 Commercial Wi-Fi (Platinum and Black)
1927 – Surface Go 2 Consumer/Commercial LTE (Platinum)
2022 – Surface Go 3 Consumer/Commercial LTE (Platinum and Black)
The serial number and model for Surface Go 2 are located under the kickstand. The model number is also noted on
the kickstand’s underside.
Glossary of Terms
The following terms are used throughout this manual:
• SDT – Surface Diagnostic Toolkit
• ESD – Electro-Static Discharge
• IBC – Tablet Back Cover
• TDM – Touch Display Module is the complete screen with all layers.
• FRU – Field Replaceable Units are sub-system components such as the SIM/rSSD door, Kickstand, and rSSD.
FRU are available only to ASPs. Some replaceable units will only be available as FRUs and therefore are only
supported at an ASP.
• Commercial Spares/CRU – Customer Replaceable Units available to commercial customers for repair by a
skilled-technician.

Microsoft Surface Go 3 Specifications

General

Display Size	10.5 inches
Resolution	1920 x 1280
Aspect Ratio	3:2
Touch	10-point multi-touch
Processor	Intel Pentium Gold 6500Y or Intel Core i3-10100Y
RAM	4GB or 8GB LPDDR3
Storage	64GB eMMC or 128GB SSD
Operating System	Windows 11 Home in S mode
Battery Life	Up to 11 hours
Weight	1.2 lbs (544 g)
Graphics	Intel UHD Graphics 615
Microphones	Dual far-field Studio Mics
Speakers	2W stereo speakers with Dolby Audio
Bluetooth	Bluetooth 5.0
Ports	1 x USB-C, 3.5 mm headphone jack, 1 x Surface Connect port, Surface Type Cover port, MicroSDXC card reader
Front Camera	5.0 MP with 1080p HD video
Rear Camera	8.0 MP with 1080p HD video
Dimensions	245 x 175 x 8.3 mm
Wi-Fi	Wi-Fi 6 (802.11ax)
Security	Windows Hello face authentication