8
Laser and LED Specications
CautionUseofcontrolsoradjustments,orperformanceofproceduresotherthanthosespeciedherein
may result in hazardous radiation exposure.
Laser Devices
ThisdevicecomplieswithInternationalStandardIEC60825-1:1993+A1+A2(IEC60825-1:2001-08)foraClass
1 and Class 2 laser product. This device also complies with 21 CFR 1040.10 and 1040.11 except for deviations
pursuant to Laser Notice No. 50, dated June 24, 2007.
Class 1 Laser Devices
Beam description: Collimated (parallel) beam of infrared light
(invisible to the user)
Laser power output: < 716 microwatts (at 832 nanometers) to
834 microwatts (at 865 nanometers)
Emitted laser wavelength: nominal: 850 nanometers,
range: (832 – 865 nanometers)
A Class 1 laser product is safe under reasonably foreseeable conditions of operation as described by
IEC 60825-1 and 21 CFR 1040.10. However, it is recommended that you not direct the laser beam (which is
emitted from the bottom of the device) at anyone’s eyes.
Class 2 Laser Devices
Beam description: Collimated (parallel) beam of light
Laser power output: < 1 milliwatt
Emitted laser wavelength: 630 – 670 nanometers
This optical device has no serviceable parts. The Class 2 laser
beam is emitted from the front of the device.
Optical (LED) Mouse
This product has been evaluated to comply with International Standard
IEC60825-1:1993+A1+A2(IEC60825-1:2001-08).
ThisproductusesLEDsthatareconsideredClass1(IEC60825-1:1993+A1+A2).
LED output power: < 67.8µW (photochemical limit), < 4.2mW (thermal limit)
LED nominal wavelength: 470nm (blue), 635nm (red)
A Class 1 product is safe under reasonably foreseeable conditions of operation as described by IEC 60825-1.
However, it is recommended that you not direct the light (which is emitted from the bottom of the device) at
anyone’s eyes.
This optical device has no serviceable parts.
Class 1 LED product
CLASS 1
LASER PRODUCT
IEC 60825-1:2001-08
To Next Page
Loading...
Need help?
General
Weight and Dimensions
