▪ Clear photographs depicting the symptoms observed.
Environmental Compliance Requirements
All waste electrical and electronic equipment (WEEE), waste electronic components, waste batteries,
and electronic waste residuals must be managed according to applicable laws and regulations.
Please do not dispose of waste lithium-ion batteries in your household garbage can or recycling
bin as they may ignite if improperly managed.
Electro-Static Discharge (ESD) Prevention
• Review and follow the general guidelines and ESD prevention steps in this Guide prior to
beginning work.
• Ensure your work surface is level/flat and covered with ESD-safe, soft, non-marring
material.
• Before opening a device, always wear an anti-static wrist strap and confirm your work area
is properly grounded to protect vulnerable electronics from electrostatic discharge (ESD).
• Parts removed from a device during the repair process should be stored in ESD-safe bags
and packaged for return or recycling in the same packaging that the new replacement part
came in.
To Next Page
Loading...
