Mid-Frame Separation Process
Required Tools and Components
Tools
• TR8 (Torx Security) driver
• Anti-static wrist strap (1 MOhm resistance)
• Soft ESD safe mat
• Microfiber / lint free cloth
• Plastic pry tool (spudger)
• Plastic tweezers
• Pliers (Elite Only)
Components
• Mid-Frame (Refer to Illustrated Service Parts List)
• Mid-Frame Screw (PN) Qty. 6, (Elite Only)
Prerequisite Steps
Discharge the battery
For devices with rechargeable lithium-ion batteries that power on, fully discharge the battery
before beginning repair. To expedite the battery discharge process:
• Connect the controller to a device wirelessly.
• Operate the device in wireless mode until the battery is fully discharged and the device
powers off.
Remove Top Case
Remove the top case as detailed in the Procedure – Removal (Top Case) for the appropriate
device. (page 14)
Procedure – Removal (Mid-frame)
1. Remove Screws
Using a TR8 (Torx Security) driver remove the 6 screws securing the back case to the mid-
frame. Note that there is one screw under the tamper evidence sticker.
To Next Page
Loading...
