For additional product safety information relevant to Microsoft Xbox devices or accessories, see
aka.ms/xbox-safety.
Repair-Specific Precautions and Warnings
For devices with rechargeable lithium-ion batteries that power on, fully discharge the
battery before beginning repair. To expedite the battery discharge process:
▪ Connect the controller to a device wirelessly.
▪ Operate the device in wireless mode until the battery is fully discharged and the
device powers off.
• As you remove each subassembly from the device, place the subassembly (and all
accompanying screws) away from the work area to prevent damage to the device or to the
subassembly.
• During all activities, check to ensure that no loose articles are on the battery or remain
inside the device before reassembling it.
Internal Power Supplies
• For optimum compatibility, performance, and product safety, we recommend using a
genuine AC power supply and AC power cord for your Microsoft device.
: Before opening a device, ensure it is powered off and disconnected from its
power source for at least 30 seconds. Disconnect the device charger or power cord from
mains power.
: Failure to take the following steps during device repair or component
replacement can result in serious personal injury or death from electric shock or in damage
to your device.
To Next Page
Loading...
