7
Connecting the monitor
1. Turn off your PC and the LCD Monitor before connecting your LCD
monitor to the PC.
2. Use VGA cable to connect the VGA connector of the LCD Monitor to
the VGA port of the PC system. Make sure the cable head is securely
connected. (Option: If your system is Dual signal model, then use the
DVI cable to connect the DVI connector to the DVI port).
3. Use Audio cable to connect “Audio in” jack on LCD Monitor and sound
card’s “Audio out” jack.
4. Plug the DC connector of the adaptor to your monitor’s DC jack.
5. Plug the female end of the power cord into the AC adaptor.
6. Connect the male end of the power cord into a wall socket.
7. Turn on your computer, and then turn on your LCD Monitor.
To Next Page
Loading...
General