Microtek 815C User Manual

14
Display is
too dark or
too bright.
If the video output level of the computer is within the spec.
Display is not
in the center.
If the signal timing of the computer is within the spec.
If the power voltage is within the spec.
Display is
shaking.
If the signal timing of the computer is within the spec.
If the signal cable is properly connected.
If the signal timing of the computer is within the spec.
Display is not
synchronized.
If the video output level of the computer is within the spec.
Cable not connected Change Computer Hz Mode Error

Microtek 815C Specifications

General

Brand	Microtek
Model	815C
Category	Monitor
Language	English