Microtek IN-800VA User Manual

BYPASSING THE INVERTER
1. Input Plug.
2. Output Plug.
3. To Load.
The Inverter can be bypassed by connecting the O/P plug (which connects the load to the inverter) directly to the socket on the
wall from where the inverter input has been taken. Care must be taken to ensure that the INVERTER-ON SWITCH has been
switched off in order that the battery does not discharge.
To bypass the inverter follow the following steps:
1. Remove input plug from the wall socket,
2. Remove output plug from the inverter's output socket, and
3. Insert output plug into the wall socket.
OR
Alternatively use a two way bypass switch externally & Simply make it ON to Bypass Mode.
By Pass Mode
Inverter Mode
Two
Way
Switch
N E L
1
3
2
10

Microtek IN-800VA Specifications

General

Brand	Microtek
Model	IN-800VA
Category	Inverter
Language	English