ScanMaker 1000XL Supplement 35
Loading a Profile
Once the profile has been produced, follow the steps below to load the profile you
just created.
1. Launch ScanWizard Pro.
2. In the Preview window, click the Scan Material icon. Select the “Reflective”
option for reflective materials; select the “Positive” or “Positive Film” option for
transparencies and slides; or select the “Negative” or “Negative Film” option for
negative filmstrips.
3. From the Settings window, click the Scanner Profile/Input Profile list box, and
select the profile you have just created.
To Next Page
Loading...
