8 ScanMaker 1000XL Supplement
Unlocking the TMA 1000XL
Before you can operate the TMA 1000XL, you will need to unlock the TMA 1000XL.
Follow the steps below:
1. Remove the yellow “Step 3” sticker
from the TMA.
2. Look for the locking knob at the
base of the TMA 1000XL.
3. Turn the locking knob
counterclockwise to the unlock
position “ ”.
Shipping the TMA 1000XL
If you have to transport the TMA 1000XL, you will need to lock the TMA 1000XL
back. Follow the steps below:
1. Make sure the TMA 1000XL is connected to the scanner, then turn off the
scanner if your scanner is on.
2. Turn the scanner back on. The TMA 1000XL's carriage will move to the standby
position in a few moments.
3. When the indicators on the front
of your TMA 1000XL and scanner
stop blinking, turn the locking
knob clockwise to the lock
position “ ”.
4. Turn off your scanner and
disconnect the TMA 1000XL
connector from the scanner. The
TMA 1000XL is ready for
transport.
To Next Page
Loading...
