Microtek SineWave UPS EB - TECHNICAL SPECIFICATIONS

TECHNICAL
SPECIFICATIONS
NOTE:- Because of a policy of continuous product improvement, the specifications are subject to change without notice.
11
MODEL SINEWAVE UPS EB/SWE²
UPS SEB / MEB 800, 1400
UPS SWE² 625, 875, 1550
Input voltage
100V~300V (Wide input voltage range)
180V~260V (Normal input voltage range)
Output Voltage on Mains mode
Same as input
Output Voltage on UPS mode
210V + 5%
Output frequency on UPS mode
50 Hz + 0.1 Hz
Switching from Mains to UPS
and from UPS to mains
Automatic
Output waveform on mains mode
Same as Input
Output waveform on UPS mode
PURE SINE WAVE
Battery charging current
Constant charging approx 10% of the rated battery current in AH
Charger
Power Factor Controlled Boost Technology
Efficiency
> 80%
> 83%
UPS Overload / UPS short circuit
110% / 300%
UPS Transfer Time
< 15 msec.
Browns out mains voltage
100V + 40V
Technology
MICRO CONTROLLER / DSP BASED DESIGN
Auto Reset Feature
Yes