Microtek SineWave UPS EB - Low Battery Condition; Short Circuit Faults; Backup Time Issues; UPS Not Operating

a) Check battery water and charge the battery with mains
minimum for 8-12 hours. If still less backup, get the
batterycheckedupfromauthorised service personnel.
a) Check the battery connections and the mains
connections.
b) Internal problem. Bypass the UPS as explained in
nextsection andcall authorised servicepersonnel.
c) AC Glass fuse blown. Check the fuse at the rear and
replace ifblown.
4. Backup timeless.
5. UPS doesnot operate.
c) Check the wiring and reduce the load and turn the reset
switch on the front panel ON-OFF-ON.
OVERLOAD
c) Short Circuit
Overload/Short Ckt.
Red LED Glows
Possible Cause / Action Suggested
b) Battery has discharged. Recharge the battery after
the mains restoration.
Problem
b) Low Battery
Low Battery
Red LED Glows
9
TROUBLE SHOOTING
LED
LED
LCM LCM LCM