Microtek TMA 1600 - Positioning Originals for Scanning; Positioning Transparent Originals

6 Microtek TMA1600 Installing and Getting Started
2
1
0
3
4
5
6
5
4
3
2
1
Follow the steps below to position transparent originals:
1. Raise the TMA1600, and make sure that nothing is on the scanner glass surface.
Positioning Your Originals
When the TMA1600 has been installed successfully, you can scan slides,
transparencies, negative film, as well as reflective materials such as photographic or
prints. You do not need to remove the TMA1600 to scan reflective materials.
Positioning transparent originals
To scan various sizes of transparent originals, you will need the correct template that
match the film to be scanned together with the black plate.
The template is used to block out light around the transparent originals, achieving
better image quality. Included in the scanner accessories package are four types of
templates – 35mm slide template, 35mm filmstrip template, 6 x 9 cm filmstrip template,
and 4" x 5" film template.