Page 13
NOTICE
T2A and T2B are only available for
some models.
4. Unplug temperature sensors T1, T2,
T2A, T2B and electronic expansion
valve (EEV) from the control board.
T1: Room temperature sensor
T2: Evaporator central sensor plug
T2A: Evaporator intput sensor plug
T2B: Evaporator output sensor plug
5. Remove T1, T2, T2A, T2B, EEV sensor
wire ties.
T2
T2A&T2B
T1
EEV
6. Take out the evaporator and drain
pan and rotate 180°.
7. Adjust the position of the mounting
parts.
8. Reinstall the evaporator and drain
pan.
Indoor Unit
Installation
To Next Page
Loading...
