NOTE
Use size “AAA” manganese or alkaline batteries. Do not use rechargeable batteries.
Batteries installation
Batteries warning as below
Fig 2
Fig 1
Fig 3
Battery not included in the packaging
1 Slide the battery compartment cover.
2 Insert the batteries, and make sure that the batteries are placed as shown in the Fig 2.
3 Slide back the battery cover.
Do not dispose of batteries in fire, batteries may explode or leak.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium)
batteries.
Non-rechargeable batteries are not to be recharged.
Batteries are to be inserted with the correct polarity.
Exhausted batteries are to be removed from the product.
The batteries must be removed from the remote controller before it is scrapped and
that they are disposed of safely.
●
●
●
●
●
●
●
14
To Next Page
Loading...
