Guidance on feeding water and disassemble & washing of the water tank
1
Pull the water tank buckle to the
horizontal state.
2
Pull out the water tank completely,
place it on a stable place, add water
and push the water tank into the
fuselage.
3
Unscrew the rotary knob in “—”
shape manually (90° anticlock-
wise) to separate the water tank
from the water pump module
(including the water pipe).
5
Position of clean water pump shown (It is recommended to clean every 3 months to
extend the service life.)
4
Pull out the water tank completely,
place it on a stable place, add water
and push the water tank into the
fuselage.
Water pump
module
Rotary knob
in “—” shape
Remove the
filter
09
To Next Page
Loading...
