EasyManua.ls Logo

Midea 60M21 - Specifications

Midea 60M21
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
04
The route of the flue must be as short as possible.
Do not connect the extractor hood to exhaust ducts carrying combustion flumes
(boilers, fireplaces, etc.).
If the instructions for installation for the gas hob specify a greater distance specified
above, this has to be taken into account.
The extractor hood has been designed exclusively for domestic use to eliminate
kitchen smells.
Never use the hood for purposes other than for which it has been designed.
Never leave high naked flames under the hood when it is in operation.
Adjust the flame intensity to direct it onto the bottom of the pan only, making sure
that it does not engulf the sides.
Deep fat fryers must be continuously monitored during use: overheated oil can burst
into flames.
The cooker hood and its filter should be cleaned regularly according to the instruction.
Switch off or unplug the appliance from the mains supply before carrying out any
maintenance work.
Clean the hood using a damp cloth and a neutral liquid detergent.
Prohibit the fire directly bake the hood.
Discharging type of this cooker hood is external discharge.
SPECIFICATIONS
60M21Model
Voltage /Frequency
Rated power
Lighting power
Motor input power
Diameter of air tube
Air flow
Noise
220V-240V~/50Hz
293W
1.5W×2
290W
150mm
800m
3
/h
72dB(A)

Related product manuals