Midea 60M21 - Product Installation; Wall Drilling and Bracket Fixing; Mark Points

07
60
B
A
60
80
243
X970-1070
100 100
80
Option
Vertical reference line
X
1
160-500
2
3
260-700
Chimney
400+390
500+490
360-900600+590
Wall Drilling And Bracket Fixing
(3)
C
As a first step, proceed with the following drawings:
●
●
●
●
l line up to the ceiling or up to the upper limit, at the center of the area in which the
hood is to be fitted.
A horizontal line A at 970 – 1070 mm above the cooker top.
A horizontal line B at a X mm above the horizontal line A.
A horizontal line C at a 243 mm below the horizontal line A .
Mark Points:
●
●
●
●
●
Mark a point (1) on the horizontal line A, 80 mm to the vertical reference line.
Repeat this operation on the other side and on the vertical reference line, checking
that the three marks are leveled.
Mark a point (2) on the horizontal line B, 60 mm to the vertical reference line.
Repeat this operation on the other side, checking that the two marks are on the same
horizontal line.
Mark a point (3) on the horizontal line C, 100 mm to the vertical reference line. Repeat
this operation on the other side , checking that the two marks are leveled.
PRODUCT INSTALLATION