Manual Operation (without remote)
2
To operate your unit manually:
1.
Open the front panel of the indoor unit.
2.
Locate the
MANUAL CONTROL button on
the right-hand side of the unit.
3.
Press the MANUAL CONTROL button one
time to activate FORCED AUTO mode.
4.
Press the MANUAL CONTROL button again
to activate FORCED COOLING mode.
5.
Press the MANUAL CONTROL button a third
time to turn the unit off.
6.
Close the front panel.
CAUTION
The manual button is intended for testing purposes
and emergency operation only. Please do not use this
function unless the remote control is lost and it is
absolutely necessary. To restore regular operation,
use the remote control to activate the unit. Unit must
be turned off before manual operation.
Manual control button
42
To Next Page
Loading...
Need help?
General
