Midea BMF Series - Page 33

Service Manual_2018-V2.0
33
13）Vacuum system,The degree of vacuum below 6Pa.
14）Perfusion refrigerant.
15）Use the vise grip pliers clamp the middle of the
process pipe, then seal welding process tube⓯⓰.
Condenser fan motor
Condenser fan motor
None
Standby condenser
Standby condenser
None
Piping system in the compressor case
❶.Drain tray
❷. condenser(enter)
❸.condenser(exit)
❹.anti-dew tupe assembly(exit)
❺.anti-dew tupe assembly(enter)
❻.main control board box assembly
❼.compressor
❽.suction transition tube
❾.Power wire
❿.dry filter