Midea BREEZELESS User Manual

Product Features
 Page 30 
FAN Operation
1. Press the MODE button to select FAN mode.
2. Press the FAN button to select the fan speed in a
range of Au-100%, in conjunction with Temp or
Temp button.
3. Press the ON/OFFbutton to start the unit.
NOTE: You can’t set temperature in FAN mode. As a
result, your remote control sLCD screen will not display
temperature.
How To Use The Advanced Functions
• Press the SET button to enter the function setting,
then press SET button or Temp or Temp button to
select the desired function.
• The selected symbol will flash on the display area,
press the OK button to confirm.
• To cancel the selected function, just perform the same
procedures as above.
• Press the SET button to scroll through operation
functions as follows:
Active clean ( ) --> Sleep( ) --> Follow Me( )
HEAT Operation
1. Press the MODE button to select HEAT mode.
2. Set your desired temperature using the Temp or
Temp button.
3. Press the FAN button to select the fan speed in a
range of Au-100%, in conjunction with Temp or
Temp button.
4. Press the ON/OFF button to start the unit.
NOTE: As outdoor temperature drops, the performance
of your unit s HEAT function may be affected. In such
instances, we recommend using this air conditioner in
conjunction with other heating appliance.

Midea BREEZELESS Specifications

General

Type	Split System
Refrigerant	R32
HSPF Rating	10.0
Power Supply	220-240V, 50Hz
Operating Temperature	Heating: -15-24°C
Features	Self-Cleaning, Sleep Mode, Turbo Mode