Need help?Do you have a question about the Midea R06E/BGCE and is the answer not in the manual?
General| Brand | Midea |
|---|---|
| Model | R06E/BGCE |
| Category | Air Conditioner |
| Language | English |
Button to start and stop the air conditioner operation.
Selects operation modes like AUTO, COOL, DRY, HEAT, and FAN.
Controls automatic up and down louver swing.
Adjusts the swing angle of the louver.
Adjusts indoor temperature and timer settings.
Activates powerful cooling operation in COOL mode.
Activates Energy-Saving operation mode for comfortable temperature.
Resets all current settings to initial defaults.
Selects fan speed among AUTO, LOW, MED, and HIGH.
Presets timer for starting (ON) and stopping (OFF) operation.
Cancels TIMER ON/OFF settings.
Used to set the current time.
Clears or activates the display digits on the unit.
Locks current settings to prevent accidental changes.
Activates plasma dust collector, ionizer, or UV light functions.
Lights up when signals are transmitted to the indoor unit.
Shows the current operation mode (AUTO, COOL, DRY, HEAT, FAN).
Indicates if the unit is ON or OFF.
Displays the set indoor temperature (17°C to 30°C).
Shows Timer ON/OFF time or clock time.
Displays the selected fan speed (AUTO, LOW, MED, HIGH).
Indicates when the remote controller settings are locked.
Shows when the Sleep operation mode is active.
Proper placement for signal transmission to the indoor unit.
Warnings about signal blockage, liquids, sunlight, and interference.
Steps for replacing batteries and resetting the clock.
Setting the clock for the first time after battery insertion.
Procedure to reset or change the clock time.
How to start the unit in AUTO mode.
How to stop the unit.
Steps to start COOL, HEAT, or FAN ONLY modes.
How to stop the unit in these modes.
Steps to start the DRY mode operation.
How to stop the unit in DRY mode.
Steps to set timer ON or OFF, check indicators.
How to cancel existing timer settings.
How to modify existing timer settings.
Example of setting the unit to start automatically.
Example of setting the unit to stop automatically.
Example of setting both ON and OFF timers.
Example of starting and stopping at different times.
Clarifies timer activation sequence.
Warnings about battery types, leakage, and life.
Advice on barriers, liquids, temperature, and EMI.
To Next Page
