Midea MOV-96HN1-R User Manual (English)

Questions and Answers:

Q
qcarlsonAug 10, 2025
Why is my Midea Air Conditioner cooling effect poor?
- E
  Eugene SanchezAug 10, 2025
  Several factors can cause a poor cooling effect. The condenser or evaporator may be dirty, requiring you to clean the heat exchanger. The filter might be blocked, so cleaning the filter is necessary. Ensure the intake or exhaust vents of the indoor and outdoor units aren't blocked by removing any obstructions to maintain ventilation. Closing any open windows and doors can help, as well as obstructing direct sunlight with curtains. Reducing heat sources in the room can also improve cooling. The refrigerant may be leaking or deficient, requiring leak detection and refilling the correct amount. Also, if the outdoor environment temperature is too high, the cooling effect of the air conditioner is deteriorated, which is normal.
D
danny22Aug 19, 2025
How to fix a Midea MOV-96HN1-R that does not run?
- C
  craig47Aug 19, 2025
  If the system isn't running, it might be due to a power supply failure. Operate it after the power supply resumes, ensuring it's properly connected. Also, check the remote controller or wired controller. If the fuse blows or the circuit breaker trips, replace the fuse or check for electrical leakage.
K
Kathryn GarciaAug 29, 2025
Why is the heating effect poor in my Midea Air Conditioner?
- A
  abakerAug 29, 2025
  A poor heating effect can occur if the outdoor temperature is below -7°C; in this case, use a heating device because the unit cannot operate normally. Ensure that all doors and windows are tightly closed. Also, the refrigerant may be leaking or deficient, requiring leak detection and refilling to the correct quantity.

Midea MOV-96HN1-R Specifications

General

Cooling Capacity	9000 BTU/h
Power Supply	220-240V, 50Hz
Indoor Unit Weight	8 kg
Type	Split-type Air Conditioner
Outdoor Unit Dimensions (WxHxD)	700 x 500 x 250 mm