EasyManua.ls Logo

Midea MOV-192HN1-R - User Manual

Midea MOV-192HN1-R
152 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MCAC-UTSM-2014-03 R410A 380~415V 3Ph 50Hz TempMaker Series Split AC
0
Midea R410A T1 380V 50Hz 3Ph
Split Type TempMaker series
Technical Manual
Applicable Model:
Indoor unit Outdoor unit
MTB-76HWN1 MOV-76HN1-R
MTB-96HWN1 MOV-96HN1-R
MTB-120HWN1 MOV-120HN1-R
MHB-76HWN1 MOV-150HN1-R
MHB-96HWN1 MOV-192HN1-R
MHA-150HWN1
MHA-192HWN1
MFA2-76HRN1
MFA2-96HRN1
Midea reserves the right to discontinue, or change specification or designs at any time without notices and
without incurring obligations.
Библиотека СОК

Table of Contents

Questions and Answers

  • J
    Jennifer WintersAug 9, 2025
    Why is my Midea MOV-192HN1-R cooling effect poor?
    • C
      Christopher PerryAug 9, 2025
      Several factors can cause a poor cooling effect. The condenser or evaporator may be dirty, requiring you to clean the heat exchanger. The filter might be blocked, so cleaning the filter is necessary. Ensure the intake or exhaust vents of the indoor and outdoor units aren't blocked by removing any obstructions to maintain ventilation. Closing any open windows and doors can help, as well as obstructing direct sunlight with curtains. Reducing heat sources in the room can also improve cooling. The refrigerant may be leaking or deficient, requiring leak detection and refilling the correct amount. Also, if the outdoor environment temperature is too high, the cooling effect of the air conditioner is deteriorated, which is normal.
  • M
    Megan ThomasAug 19, 2025
    How to fix a Midea MOV-192HN1-R that does not run?
    • R
      Robert FarmerAug 19, 2025
      If the system isn't running, it might be due to a power supply failure. Operate it after the power supply resumes, ensuring it's properly connected. Also, check the remote controller or wired controller. If the fuse blows or the circuit breaker trips, replace the fuse or check for electrical leakage.
  • D
    David PerezAug 29, 2025
    Why is the heating effect poor in my Midea Air Conditioner?
    • D
      dwalkerAug 29, 2025
      A poor heating effect can occur if the outdoor temperature is below -7°C; in this case, use a heating device because the unit cannot operate normally. Ensure that all doors and windows are tightly closed. Also, the refrigerant may be leaking or deficient, requiring leak detection and refilling to the correct quantity.

Summary

Med-static Duct Indoor Unit

Hi-static Duct Indoor Unit

Floor-standing Indoor Unit

Refrigerant Circuit Diagram

Cooling Capacity Tables

Lists cooling capacity tables for floor-standing models.

Outdoor Unit

Technical Specifications

Contains detailed technical specifications for the outdoor units.

Wiring Diagrams

Electric Characteristics

Installation

Installation Notes and Cautions

Duct Type Indoor Unit Installation

Details the procedure for installing duct type indoor units.

Floor-standing Indoor Unit Installation

Explains the installation process for floor-standing indoor units.

Outdoor Unit Installation

Covers the installation procedures for the outdoor units.

Refrigerant Pipe Connection

Details the process of connecting refrigerant pipes between units.

Refrigerant Pipe Heat Insulation

Electrical Connection Procedures

Describes electrical connections and wiring requirements.

Trial Run Procedure

Details the procedure for performing a trial run after installation.

Troubleshooting Common Issues

Routine Maintenance Procedures

Midea MOV-192HN1-R Specifications

General IconGeneral
Power Supply220-240V, 50Hz
Air Flow (High)850 m³/h
Noise Level (Indoor)42 dB(A)
TypeSplit
Cooling Capacity18000 BTU/h

Related product manuals