Midea C01 User Manual

161616
19
. Undo the NTC
I.Undo the top cover,
control panel, service
plate box and front plate.
II.Undo the NTC with
special tools.
20
.Undo the door glass
I. Open the door, remove
two screws fixing the
hinge and front plate,
and
then remove the door.
II. Remove eleven
screws
on the inner door.
III. Remove the outer
door
and the inner door
with
special tool.
21
.Undo the panel support
I. Undo the top cover
II.Undo the control panel.
III.Remove two screws
fixing the panel support,
and then remove it.
22.Undo
the drum tub
assembly
I.Remove the motor
II.Pull out the heater.
III.Remove the belt.
VI.Remove the screws
fixing the pulley, and then
take out the pulley.
V.Remove the screws
fixing
the front and rear tub,
and
then remove the tub.
VI.Remove the inner drum
kit.
3 UNPACKING WAYS OF MAIN PARTS

Midea C01 Specifications

General

Brand	Midea
Model	C01
Category	Washer
Language	English