Need help?Do you have a question about the Midea C01 and is the answer not in the manual?
Details safe operation, use of genuine parts, grounding, insulation, and post-servicing checks.
Explains safety warnings, prohibitions, and required actions using standard symbols and their meanings.
Provides warnings on insulation resistance, modifications, socket use, grounding, wet locations, water splash, dust, and flammables.
Covers warnings for touching rotating parts, installation care, unplugging, hand safety, and water leakage prevention.
Guides on entering service mode and performing diagnostic tests like version switchover, error code checking, and version information.
Details self-check procedures for components and notes on marketing-show mode limitations.
Details unpacking the back cover, top cover, control panel, service plate box, door lock, front plate, and lower counterweight.
Covers unpacking the gasket, PCB panel, detergent box, inlet valve, pressure switch, pulley, upper counterweight, and absorber pin.
Explains unpacking the filter, drain pump, heater, NTC, door glass, panel support, drum tub assembly, absorbers, and motor.
Lists common malfunction codes (E10-E70) with their reasons, descriptions, and recommended solutions.
Provides fault trees for diagnosing specific malfunctions like non-heating, door lock, water inlet, overheating, drain, and drum rotation issues.
Addresses general malfunctions like machine not working, water leakage, abnormal speed, noise, and provides final troubleshooting advice.
Details resistance checks for NTC, Water Level Sensor, Door lock, Water valve, Drain pump, and Heater.
Lists essential tools like sleeve spanner, spanner, pliers, and other common tools with their applications.
To Next Page
General
