Midea C21-RT2120 - Cleaning and Maintenance; Self-Diagnosis for Abnormalities

11
Before
cleaning,
please
switch
off
the
appliance
first
and
then
disconnect the power plug from the power outlet. Wait till the cooker
plate of the induction cooker is not hot and start cleaning.
After using the induction cooker for a long time, the opening of air
inlet/air outlet will pile up with dust or other dirt, please wipe it with a
soft dry cloth. Dust in the air inlet and outlet can be cleane
d by using
a soft brush or a mini vacuum cleaner.
Note: Please do not rinse it with water
For oil spots on the cooker plate, wipe the cooker plate by using a
soft moist cloth with a little tooth paste or mild detergent. And then
use a soft moist cloth to wipe it until no stain remains.
When not using it for a long time, please disconnect the power plug
from the power outlet and protect the induction
cooker from any dust
or bugs.
Abnormalities
Key checking points and trouble shooting
After
plugging
in
the
power
cord
and
pressing
the
“ ”
key,
the
indicator
and
display
do
not
light up.
The
“ ”
indicator
lights
up
and the display works normally, but
heating does not start.
Heating suddenly stops during the
process.
Is the power plug properly connected?
Is the switch, power outlet, fuse or power cord
damaged?
Is the pot material prop
er?
Is the appliance in a “Preset” working status?
For other causes, please take the appliance to a
repairing and maintenance site to be fixed.
Is the temperature of the oil too high when frying dishes?
Is
the
temperature
of
the
surroundings
very
high?
Is
the
air
inlet
or
air
outlet
of
the
induction
cooker blocked?
Is
the
default
heating
time
of
the
induction
cooker over?
The
self-safety
protection
of
th
e
induction
cooker
starts,
wait
for
several
minutes
and
connect power to use it.
Cleaning and maintenance
Self-diagnosis for abnormalities