Service Manual_2018-V1.0
33
the temperature can be set circularly, every time press the key , the setting temperature turn 1℃（℉）-14℃
→-15℃→→→→-22℃
7℉→6℉→→→→-7℉
-22℃→-21℃→-20℃→→→→-14℃
-7℉→-6℉→→→→7℉
2、Operation instruction:
Press the “freezing” bottom once, the set temperature of the freezing chamber’s temperature area
can be regulated. After regulating, the newly set temperature will be in effect 30s later.
9.4 Mode setting
9.4.1 Super freeze mode
Press the “SUPER FREEZE” bottom, set or cancel super freeze mode. The temperature of freezing
is -22℃（-7℉）
9.4.2 Super cool mode
SUPER COOL
Press the “SUPER COOL” bottom, set or cancel the super cool mode. The temperature of cooling is
1℃(34℉).
9.4.3Ice maker mode
Press the “ICE MAKER ON/OFF”bottom, then bottom light will be lighten or darken, setting or cancel
ice maker function
1、Eye ice maker test
1）Test purpose：inspection the ice maker system whether working normal, include ice maker motor and
water valve, inspection the water system whether unblocked on the through water state
2）Before enter to Ice maker test prepare：inspection whether there is ice in the ice maker and clean up
3）Enter：when the refrigerator and freezer door is open, long press the “ICE MAKER” and “FREEZER”
bottom 3s（the upper photo 1&6）, buzzing sound, ice maker mode icon blink enter to check the ice
maker motor and water valve
4）Load：Ice maker component check, after the ice maker turn over the ice once and until the Ice-probing
rod move to level position, stop movement, water pump on 2s
Water valve: water valve on 2s
5）Exit：load action finished exit Ice maker test mode, if check ice storage box is full with ice or ice making
operation is fault, exit Ice maker test mode
To Next Page
Loading...
Need help?
General
