11
OPERATION INSTRUCTIONS
Operating Instructions Of The Machine Body
Function descriptionButton
●
●
When there is no external power supply, the whole machine is
battery powered. Press the switch button and the whole
machine enters the standby state. Press the switch button again
to disconnect the battery power supply;
When the external power cable is plugged in, press the switch
button to supply power to the whole machine, and the battery
is charged at the same time, the battery level indicator flashes
alternately; Press the switch button again, the power supply of
the whole machine is disconnected, and the battery is no longer
charged.
●
In power-on state, press this light adjustment to adjust the light
brightness 3 levels : Strong - Medium - Weak.
●
In power-on state,press the wind speed key to select set the
wind speed the following sequence:
level 1 level 2 level 3 ....
level 9 level 0 level 1 level 2 level 3 ....
ON/OFF KEY
TIMER KEY
WIND SPEED
KEY
Light
adjustment
●
In power-on state, press this timer key to set the timer:
0h-1h-2h-....9h-0h, The ‘ ’ is lit.
Wind Speed or Timer indicator
Battery Level indicator
Wind Speed
Timer
Light Adjustment
ON/OFF
USB
LED
Timer indicator
EN
To Next Page
Loading...
Need help?
General
