Why does my Midea Air Conditioner smell bad?
If your Midea Air Conditioner emits a bad odor, it could be due to absorbed odors from the environment, such as furniture, cooking, or cigarettes. Alternatively, the unit’s filters may have become moldy and need cleaning.
Why does my Midea Kids Star Air Conditioner change to FAN mode by itself?
The Midea Air Conditioner might switch from COOL/HEAT mode to FAN mode for two reasons: to prevent frost from forming, in which case it will return to the previous mode once the temperature rises; or because the set temperature has been reached, causing the compressor to turn off, and it will resume operation when the temperature fluctuates again.
Why is my Midea Kids Star Air Conditioner emitting dust?
If you notice dust emitted from your Midea Air Conditioner, it's likely that dust accumulated during a period of non-use. Covering the unit during long periods of inactivity can help prevent this.
Why is my Midea Kids Star making hissing and squeaking noises?
A low hissing sound is normal during the Midea Air Conditioner's operation. It is caused by refrigerant gas flowing through both the indoor and outdoor units. Also squeaking sound is normal and caused by expansion and contraction of plastic and metal parts during operation.
Why does my Midea Kids Star indoor unit emit white mist?
White mist from the Midea Air Conditioner's indoor unit can occur in humid regions due to a large temperature difference between the room’s air and the conditioned air.
Why is my Midea Air Conditioner emitting white mist from both units?
White mist from both the indoor and outdoor units of your Midea Air Conditioner may be emitted when the unit restarts in HEAT mode after defrosting, due to moisture generated during the defrosting process.
General| Type | Split Air Conditioner |
|---|---|
| Refrigerant | R32 |
| Power Supply | 220-240V, 50Hz |
| Cooling Capacity | 9000 BTU/h |
| Features | Sleep Mode, Turbo Mode |
| Noise Level | 22 dB (Low) |
Safety warnings for installation and product usage.
Safety guidelines for electrical connections and cleaning procedures.
Instructions for operating the unit in Auto, Cool, and Heat modes.
Safety warnings and initial troubleshooting for common problems like no power or mist.
Troubleshooting steps for unit failure, frequent starts/stops, heating issues, and error codes.
To Next Page