Midea KJR-12B/DP-F Series

8
Preparation Before Installation
1. Ensure you have the following parts
Table 1
No Name Quantity Remarks
1 Remote Control 1
2 Screws 3
M4X20 (For mounting on the wall)
3 Anchors 3
For mounting on the wall
4
Screws 2
M4X25 (For mounting on switch box)
5 Plastic screw bars 2 For fixing on switch box
6
The connective
wires group
1 Optional
2. Prepare the following tools
Table 2
No Name Quantity
1
Switch box 1
2
Wiring tube (insulating sleeve and tightening screw)
1
3. Select installation location
DO NOT install the remote control near ammable
liquids or gases such as gasoline or hydrogen sulde.
Doing so creates a re hazard.