Midea KJR-12B/DP-F Series

15
Using the wire controller to set airow rate
(some models)
When the air conditioning unit is o, perform the
follwoing steps:
①Press“MODE” and "FAN" for three seconds.
②Press “△” or “▽” to select the SP.
③Press “MODE” to set the airow rate in the range
of 0~4.
④Press “ON/OFF” to nish the airow setting.
“0”: No airow change
“1”~”4”:Airow increase
progressively
TIMEON
TIME
OFF
FOLLO
W
ME
AUXIL
HEATER MODE
FAN
SPEED
ECO
SWING TEMP
RESET
LOCK