MCAC-CTSM-2018-1 Flooded type water cooled screw chiller (MIC)
49
appear.
Figure 6.14
3) User parameter setting- Automatic On/Off
If user wants to use timer function for start or shutdown, choose “timer” in control mode of the figure 2
and enter user setting. Press AUTOMATIC ON/OFF and enter figure 6.15 as below:
Figure 6.15
The timer for start and shutdown can be set for one week, and unit will start or shutdown according to the
timer setting. If the unit needs to continue running for a period of time, for example: staringt from
Tuesday 10:00 and shutdown at 16:00 Thursday, user can set as 10:00 and switch the button from
Invalid to Valid in the timer starting setting of Tuesday, then set as 16:00 and switch the button from
Invalid to Valid in the timer shutdown setting for Thursday, rest timer buttons are set as Invalid .
Check the system time when using the timer function correspond to the system time.
To Next Page
Loading...
Need help?
General