CleaningCharging Robot Vacuum
Please clean up the wires and sundries scattered on the ground and remove precious,
fragile and dangerous items that are easy to fall before cleaning.
15 16
During its first cleaning job, it is recommended to follow the robot to find some possible
problems. The robot can clean much more smoothly after that. If certain area do not
need to be cleaned, you can add No-Go Zones or Virtual Walls on the map via the app
to prevent the robot from entering the specified area.
Do not use your robot on wet surfaces or surfaces with standing water. Before using the product on
a rug with tasseled edges, please fold the rug edges under.
NOTE
Press and hold the power button to turn on the robot. 1.
Place the robot on the charging base to start charging. We recommend that you
charge the robot for at least 6 hours before using it for the first time.
2.
1.
2.
3.
4.
5.
Please do not place the charging base on carpets or soft floors and keep the area dry.
Remove the mopping cloth holder when the robot is under the charging state.
To make sure the robot is always ready for use, we suggest that you keep the robot charged on
the charging base. For long-term storage, remove the robot from the base and store it in a cool &
dry place.
If the robot is not used for more than 3 months, allow it to get charged for at least 12 hours
before using.
To preserve the battery lifespan, we suggest you fully charge the battery at least once every
six months.
NOTE
Start / Pause
ENEN
To Next Page
Loading...
Need help?
General
Weight and Dimensions
