ITEM PICTURE HOW TO DISASSEMBLE
1.BACK COVER
①Unscrew the screws on the
back cover ( Red circle part) and
then take out the rear cover.
2. The earth screws,
capacitor screws, and
then pull out the air
pipe.
( make the air pipe
and
suspend poles
separate)
①Unscrew the earth screws to
make the earth wire
subassembly
and cabinet separate
②Unscrew the capacitor screws,
take down capacitor catch
③Pull out the air pipe to make
the air pipe and suspend poles
separate (When you install the
air pipe, you remember to coat
adhesive for preventing leakage)
• Unplug power cord for the work such as disassembling
which is not unnecessary to power on . Do not hold the plug
by a wet hand.
Failing to unplug may cause an electric shock.
WARNING
10
3 DIASSEMBLY INSTRUCTION
To Next Page
Loading...
