Midea MAE50-S1102 User Manual (English)

Questions and Answers:

R
Ricky ShepherdAug 12, 2025
Why is no water coming into my Midea MAE50-S1102?
- M
  Matthew LawsonAug 12, 2025
  There could be several reasons why water isn't flowing into your Midea Washer. First, check if the power is on and replace the fuse if necessary. Ensure the water supply is turned on with sufficient pressure. Verify the inlet hose is correctly connected and the water tap is open. Also, the filter of the inlet valve may be blocked by dirt; clean it. If the coil of the inlet valve is damaged, replace it. Finally, make sure the START/PAUSE button is deactivated.
B
Beth ArnoldAug 19, 2025
What to do if my Midea MAE50-S1102 Washer won't start?
- A
  Amber CordovaAug 19, 2025
  If your Midea Washer isn't starting, there are a few things to check. First, ensure that the power is on and replace the fuse if necessary. Make sure the power supply voltage is adequate. The washer also requires water to reach a certain level to start, so ensure that the water reaches the required level. Lastly, verify that the DELAY function is not activated.
R
robertritterAug 27, 2025
How to fix abnormal spin in Midea MAE50-S1102?
- Y
  Yolanda RodriguezAug 27, 2025
  Abnormal spinning in your Midea Washer can be due to several factors. Ensure the door lid is firmly closed. Check if the laundry is improperly or excessively loaded; rearrange or reduce the load if needed. Adjust the feet of the washing machine to ensure it is level. Also, the washing machine’s motor belt might be loose, so try tightening it.
N
Nicole TurnerSep 4, 2025
What to do if Midea MAE50-S1102 is not draining properly?
- S
  Stephen TownsendSep 4, 2025
  If your Midea Washer is not draining correctly, check these items: Ensure the drain hose is installed at the proper height. Clear any blockages at the end of the drain hose. Clean the internal rubber ring of the valve.