EasyManuals Logo

Midea MAE50-S1102 User Manual

Midea MAE50-S1102
39 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
10
PREPARATION BEFORE WASHING
PREPARATION BEFORE WASHINGPREPARATION BEFORE WASHING
PREPARATION BEFORE WASHING
ADJUST THE FOOT TO STABILIZE
THE WASHING MACHINE.
INSTALL THE WATER
INLET HOSE.
CONNECT TO A
POWER SOURCE.
ENSURE PROPER
PLACEMENT OF
DRAIN HOSE FOR
WATER DRAINING.
TURN ON THE
WATER SUPPLY.
PLACE
CLOTHES
INTO THE
WASHER
AND ADD A
SUITABLE
AMOUNT OF
WASHING
POWDER
BASED ON
LAUNDRY
VOLUME,
AND SELECT
WASH
CYCLE
PROGRAM.
Before washing clothes, take out any coins,
keys, and other hard items, while zipping up
zippers to prevent any damage.
NOTE: The water will overflow when the
height of the drain hose is under 34”.
UPPER DRAINAGE
~34-40”
TWO WATER INLET HOSES
Adjustable foot. Rotating clockwise
will extend the foot, and rotating
counterclockwise will shorten the foot. Slightly incline
the washer first and loosen the adjustable foot knob
prior to rotating. Adjust all four corners of the washer
to ensure an even, stable surface with the ground.
Then tighten the adjustable foot knob and lock it. If
the ground is not flat, make corrections on the ground
surface, otherwise the washer barrel will spin on an
incline and knock into the washer cabinet.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Midea MAE50-S1102 and is the answer not in the manual?

Midea MAE50-S1102 Specifications

General IconGeneral
BrandMidea
ModelMAE50-S1102
CategoryWasher
LanguageEnglish

Related product manuals