9
QUICK SINK ADAPTER INSTALLATION
QUICK SINK ADAPTER INSTALLATIONQUICK SINK ADAPTER INSTALLATION
QUICK SINK ADAPTER INSTALLATION
When installing the quick sink adapter to the sink faucet, follow these guidelines:
1. Remove the aerator from your faucet nozzle and determine the size and type of the faucet
(Outside Threaded End or Inside Threaded End).
2. Once you determine the size and type of the faucet, place the proper sized rubber washer into
the silver faucet adapter.
3. Attach the silver faucet adapter to the sink faucet.
4. Attach the faucet adapter to the water inlet hose and ensure that the rubber washer is placed
between the adapter and the water inlet hose.
5. Attach the other end of the water inlet hose to the water inlet on the washer, and ensure that
the rubber washer is placed between the water inlet hose and the washer.
To Next Page
Loading...
Need help?
General