26
COMFORT SENSE feature (On some models)
This feature can be activated from the remote control ONLY. There is no indicator light on the control
panel. The remote control serves as a remote thermostat allowing for the precise temperature control
at its location.
To activate the feature, point the remote control towards the unit and press the
button. The remote control will send this signal to the AC until press the Comfort Sense
button again. If the unit does not receive the Comfort Sense signal during any 7 minutes interval, the
unit will exit the Comfort Sense mode.
NOTE: This feature is unavailabe under FAN or DRY mode.
9. Continuous Fan function
10. Other features
the fan will stop when the
compressor stops.
Comfort Sense
Comfort Sense
To Next Page
Loading...
