Operating
Instructions
(With Remote)
Function Buttons
Before you begin using your new air conditioner, make sure to familiarize yourself with
its remote control. The following is a brief introduction to the remote control itself. For
instructions on how to operate your air conditioner, refer to the Operating Instructions
section of this manual.
O N/O F F
T E MP
SHORT
CU T
TIMER
ON
TIMER
OFF
MODE
FAN
LED
SL EEP
FOLLOW
ME
SHORT CUT
Sets and activates your favorite pre-settings.
ON/OFF
Turns the unit on or off.
TEMP
Increases temperature in 1°C (1°F) increments.
Max. temperature is 30°C (86°F).
TIMER ON
Sets timer to turn unit on (see How to Use
Basic Functions for instructions)
TIMER OFF
Sets timer to turn unit off (see How to Use
Basic Functions for instructions)
LED
Turns indoor unit’s LED display on and off.
If you are sensitive to light while sleeping,
you can press the LED button to turn off the
LED display on the unit. Press the button
again to turn it back on.
FOLLOW ME
Temperature sensing and room
temperature display button.
SLEEP
Saves energy during
sleeping hours.
Optional
TEMP
Decreases temperature in 1°C (1°F) increments.
Min. temperature is 17°C (62°F).
NOTE: Pressing and hold and buttons
together for 3 seconds will alternate the
temperature display between the °C & °F scale.
FAN SPEED
Selects fan speeds in the
following order:
AUTO LOW MED HIGH
MODE
Scrolls through operation modes
as follows:
AUTO COOL DRY HEAT FAN
NOTE:
Please do not select HEAT mode
if the machine you purchased is
cool-only type. Heat mode is not
supported by the cool-only models.
Page 18
To Next Page
Loading...
Need help?
General
